
RVC0.M18,意大利VIS液壓安全閥
RVC0.M18閥門系列
METRIC墨盒 - 350巴
直接作用 - 提升型
VIS液壓安全閥描述
一個螺絲,墨盒式,直接作用,提升型,通常
閉式液壓安全閥。它通常用于保護液壓
組件從壓力瞬變。當壓力在
入口(1)到達閥門設置,閥門開始打開到油箱
(2)節流量使壓力上升zui小化。
偏轉器的創新幾何實際上非常低
提升速度,提升設計保證了很大的穩定性。
墨盒可快速響應液壓裝置中的載荷變化
需要低內部泄漏的電路以及有限的滯后。
注意:可以使用標準配置中的RVC0
交叉浮雕應用(端口2的背壓)。
VIS液壓安全閥技術特點
所有外表面均鍍鋅,防腐蝕。
所有閥門零件均由高強度鋼制成。提升器硬化
并保持zui小的磨損和延長使用壽命。
調節螺絲不能從閥門回退。
正停止可防止彈簧變硬。
可選彈簧范圍為350 bar(5000 psi)
油箱端口(端口2)上的背壓直接與之相加
閥門設置為1:1比例。
公制腔。
RVC0.M18,意大利VIS液壓安全閥
| Maximum operating pressure | 350 bar |
| Maximum flow | 30 l/min |
| Maximum internal leakage | 0.25 cc/min to 80% of nominal set point |
| Pressure settings | established @ 5 l/min |
| Reseat pressure | nominal 90% of crack pressure |
| temperature | -30°C to 110°C |
| fluids | Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt |
| orientation | no restrictions |
| installation torque | 30-35 Nm |
| seal kit code | SK.006 |
| weight | 0.140 kg |

NOTE: The performance chart illustrates flow handling capacity at maximum setting for each spring range option. P/Q curves are recorded at TOil = 40°C and 46 cSt


RVC0.M18,意大利VIS液壓安全閥